Solo Sailing Preparation: How Fraser Flight Is Refitting Shamwari to Race Around the World
Before Fraser Flight can attempt to sail solo, nonstop and unassisted around the world, he has to prepare a 20-year-old Class40 for months at sea. The refit of Shamwari is also his chance to learn the boat well enough to trace a fault and make a repair when he’s the only person aboard.
Fraser Flight wants to know where every cable runs on Shamwari. He wants to know what each fuse protects and where each pipe leads. In the boatyard, he can trace a circuit with the panels open and his tools laid out. In the Southern Ocean, he might have to do the same job in the dark, with the boat moving under him and several nights of broken sleep behind him.
That is the practical side of solo sailing preparation for the 2027 Global Solo Challenge. Flight is aiming to become the first Zimbabwean to sail solo, nonstop and unassisted around the world. His Class40, built in 2006, has already shown him what she can do when the wind fills in. Now he’s preparing her for four to five months offshore, where the same person who notices an instrument has gone blank will have to work out what failed and decide how much time he can spend fixing it.
Solo sailing preparation starts in the boatyard
Some of the first jobs on Shamwari were familiar boatyard work. Flight and his fiancée sanded the hull in freezing weather before applying fresh antifouling. Once the boat was back in the water, he sailed her from the Solent around Land’s End to Milford Haven. On the first day they drifted with the tide. Later in the passage, the wind built to 30 to 35 knots. Flight was surprised by how quickly the boat got up on the plane and accelerated. He was getting to know how she sailed while much of the refit still lay ahead.
The next phase takes him into the rig itself. Flight plans to pull the carbon mast for an ultrasound inspection and carry out any repairs it needs. The standing rigging is due for replacement, the running rigging needs attention and he’s working on a sail inventory that will cover a range of conditions within the limits of what he can carry and handle alone. Grouping those jobs while the mast is down gives him access to parts of the rig that are harder to work on once it’s stepped.
He also has wind instruments, autopilot electronics and power generation equipment to wire in. Much of the equipment is already on hand. His involvement in the installation is what will teach him which systems share a power supply, where connections sit and what he can get to without dismantling half a compartment. If an instrument fails offshore, that knowledge gives him a place to start looking.
“I need to know absolutely everything on that boat, because there’s no one else out there to help me.”
Building in redundancy where it matters
One of the bigger structural jobs is creating five watertight compartments, including a crash compartment forward and a buoyancy compartment aft. Adding bulkheads and watertight doors takes design work, materials and time in the yard. It also makes Flight think through how he would move around the boat if one compartment were compromised and which equipment he could still reach from the others.
His plan for the life rafts is a concrete example. One is intended for the deck, the other for a locker. If he can’t get to one, he has another option. He’s also considering where to install tracking and navigation equipment and where to keep emergency beacons so he can reach them from the cabin. An item can be neatly stowed and still be in the wrong place for the circumstances in which he might need it.
Flight brings a chief officer’s experience to those decisions. On a superyacht, he trains crew and runs drills so people know their roles and where the equipment is. On Shamwari, all of those roles fall to him. Thinking through how a drill would work with one person aboard helps him decide where equipment belongs while he can still change its position.
What one skipper can handle
Shamwari has manual winches. Every line that needs hauling or trimming will be Flight’s to deal with, and that has a bearing on which sails he takes. A sail has to earn the space and weight it occupies on a Class40. It also has to be something he can get out, set and put away on his own, including when he’s cold and trying to complete a change before the weather builds.
Storage affects the work of sailing the boat, too. Flight expects some of his gear and supplies to serve as movable ballast. A tack or gybe can mean moving heavy equipment across the boat and shifting it back when he changes course again. The way he packs ashore determines how much handling that takes each time. On a passage lasting months, a choice about where something lives can become a job he repeats hundreds of times.
Provisions bring the same problem into everyday life. Flight is working out how to stow months of food and organise it in daily rations. He expects eating enough to be harder in the cold of the Southern Ocean. A day’s food needs to be easy to find and prepare while he’s also watching the weather, tending the sails or sorting out a fault. How he arranges the cabin will influence how much time and effort those ordinary jobs take on his busiest days.
A boat that has to work when the skipper is tired
From Spain, the race takes Flight down the Atlantic, across the doldrums and into the Southern Ocean before he rounds Cape Horn and heads north again. He’s learning the routing software and refining his estimates of what Shamwari can do in different conditions. Farther south, a shorter route can bring colder weather and less room to manoeuvre near the ice limit. Understanding how the boat performs gives him a better basis for deciding where to put her as conditions change.
Flight expects to sleep in short stretches and use radar and AIS to help him keep track of traffic. He points out that some vessels won’t transmit on AIS and some targets will be difficult to pick up on radar. Each watch check brings him back to the same boat, with the same jobs still waiting. Over weeks of broken sleep, the time it takes to find a fitting, identify a breaker or reach a piece of equipment matters.
Much of the value of the refit is in those small decisions. If Flight knows which connections to check when an instrument stops working, he can narrow down the fault before pulling more of the boat apart. He can also make a better decision about whether the job can wait. The work of learning the systems at the dock gives him a way to stay methodical when a repair is competing for his attention with the weather and the boat.
What Fraser Flight Is Taking to the Start Line
Flight grew up sailing on Zimbabwe’s Lake Kariba, where crossing the water in a dinghy could bring him within sight of rhinos at the shoreline. His grandfather, Ian Fraser, had sailed from Jamaica to Cape Town by way of the Pacific. Those were the stories Flight grew up hearing, and they gave him the idea that one day he might sail around the world himself. As he prepares to represent Zimbabwe offshore, he wants people following the race to know something of the place that taught him to sail. He’s using the campaign to draw attention to wildlife conservation and to charities supporting pensioners in Zimbabwe.
Getting Shamwari to the start line is the immediate job. Flight estimates the campaign will cost about £250,000 and says he’s put £100,000 of his own savings into it. Sails, navigation equipment, life rafts and provisions all have a share of that budget. So does structural work that will be largely hidden once the boat is back together. Alongside the cost is the time Flight needs to spend fitting equipment, learning the systems and sailing the boat before he sets off.
Through Notes on a Boat, supporters can help fund that preparation and leave a message Flight will carry aboard. He’d already read a few handwritten notes from Zimbabwe while packing them. Some moved him to tears, so he put the rest away to read at sea. Donate and leave Fraser a note
After months in the yard, Flight took Shamwari out alone for the first time. He’d just renamed her, choosing a name that means “friend” in Shona. Two dolphins came alongside, and he took it as a welcome. The boat that carries those notes around the world will be the one he’s getting to know now, with the mast down for inspection and the panels open while he works out exactly where those cables go.
───────────────────────────
PRESENTED BY
VELLUTO PRODUCTS
───────────────────────────
High-performance ceramic marine care, freshly blended for yachts, tenders and personal watercraft. Engineered to protect against salt, UV exposure, oxidation and water spotting. Built for life on the water.





Comments